Automated Placement RS-1R JUKI SMT Machine Low Resistance 1500×1810×1440mm

Optimum loading speed 47,000CPH* to achieve high-speed loading

A wide range of component stress: component size 0201～□74㎜, can correspond to 50×150㎜. The maximum patch height of the component can correspond to 1mm-25㎜

The best line balance to achieve the highest production volume

According to the corresponding components, the recognition position of the new mount head unit can be changed

JUKI's unique laser and visual recognition technology can realize high-speed and high-precision parts recognition

SMT Advantage:
Surface mount technology, SMT and its associated surface mount devices, SMDs considerably speed up PCB assembly as the components simply mount on the board.
Look inside any piece of commercially made electronic equipment these days and it is filled with minute devices. Rather than using traditional components with wire leads like those that may be used for home construction and kits, these components are mounted onto the surface of the boards and many are minute in size.

1. Good mechanical performance under shock and vibration conditions. (Partly due to lower mass, and partly due to less cantilevering.)

2. Lower resistance and inductance at the connection; consequently, fewer unwanted RF signal effects and better and more predictable high-frequency performance.

3. Better EMC performance (lower radiated emissions) due to the smaller radiation loop area (because of the smaller package) and the lesser lead inductance.

4. Fewer holes need to be drilled. (Drilling PCBs is time-consuming and expensive.)

5. Reasonable initial cost and time of setting up for mass production, using automated equipments.